Gallery: How F1 tech evolved during the 2024 season

Pink Bull Racing RB20 element

Picture by: Giorgio Piola

An in depth-up of the Pink Bull RB20’s rear finish, that includes a downward sloping floor on the tail finish of the engine cowl. It is also obvious how the semi-detached tip part sits forward of the higher flap line and reaches out over the mainplane to reveal extra of the endplate cutout.

McLaren MCL38 element

Picture by: Uncredited

The McLaren MCL38 with flo-viz paint on the rear wing, beam wing and diffuser, because the staff seems to get visible affirmation that they are performing as anticipated.

Haas VF-24 element

Picture by: Giorgio Piola

A superb angle of the Haas VF-24’s entrance wing, displaying the winglet-like slot hole separator brackets mounted between the 2 higher flaps, the semi-detached and twisted flap suggestions and the outwardly angled winglet mounted above all help with outwash.

Alpine A524 element

Picture by: Uncredited

A take a look at the bib’s development and the sprung mechanism mounted between it and the chassis on the Alpine A524, whereas a number of the different ancillaries are additionally packed within the area.

VCARB RB01 element

Picture by: Uncredited

A take a look at the ground’s vanguard on the VCARB01, noting the spacing of the fences, with one of many three inside fences positioned inboard, whereas the opposite two are extra paired up with the outer fence.

McLaren MCL38 element

Picture by: Filip Cleeren

An uncommon view of the McLaren MCL38 over the rear wing exhibits the sidepods and the gullies that run down their size.

Ferrari SF-24 element

Picture by: Giorgio Piola

An outline of the Ferrari SF-24’s rear finish in Bahrain, with a bi-plane type beam wing association, medium downforce spoon-shaped rear wing and an honest view of the contouring of the diffuser’s ceiling.

Aston Martin AMR24 rear element

Picture by: Filip Cleeren

A equally respectable view of the Aston Martin AMR24’s rear finish, together with the double aspect beam wing and centreline cooling, which features a cutout alongside the engine cowl’s backbone.

Mercedes W15 technical element

Picture by: Uncredited

A low downforce rear wing for Mercedes in Saudi Arabia, with a big notch lower out within the centre of the higher flap, a extra relaxed flap angle, a mainplane that takes up a lot much less of the allowable field area and a semi-detached tip part that reaches ahead over the mainplane part of the endplate.

Ferrari SF-24 technical element

Picture by: Uncredited

A peek beneath the Ferrari SF-24’s sidepod bodywork reveals the placement of a number of the electronics, hydraulics and coolers housed inside.

Ferrari SF-24 technical element

Picture by: Uncredited

A Ferrari mechanic prepares to put in the entrance brake calliper, which already has the cooling fairing connected.

Pink Bull Racing RB20 technical element

Picture by: Uncredited

An in depth-up of the nook of the rear wing on the Pink Bull RB20, with its semi-detached, squared-off tip part and teardrop-shaped flap pivot. That is cut up to permit the flap to rotate when DRS is energetic however presents a special aerodynamic response than a barrel-style flap pivot when within the closed place.

Pink Bull Racing RB20 entrance brake drum element

Picture by: Uncredited

A take a look at the extraordinarily sculpted brake duct inlet and outlet on the Pink Bull RB20, with aerodynamic consideration utilized to each the interior and exterior options of each.

Additionally, word the V-shaped profile of the underside of the chassis and the driving force cooling ducting that is protruding out from the bulkhead to be able to mate internally with the nostril phase.

RB F1 Workforce VCARB 01 element

Picture by: Filip Cleeren

In Saudi Arabia the VCARB01 with a big single-element beam wing and a lowered capability spoon-shaped rear wing. Additionally word the stepped and cutout decrease rear fringe of the brake duct winglet and the deep, upwashing swage line integrated into the rear wing endplate.

Mercedes W15 entrance wind element

Picture by: Uncredited

Mercedes’s unique entrance wing design for 2024 featured a slender inboard flap part to keep up legality and supply a special set of design parameters for the opposite sections of the wing round it.

McLaren MCL38 element

Picture by: Uncredited

This shot offers an attention-grabbing vantage level of the ahead, upwardly angled and twisted geometry of the sting wing, which has two strakes embedded throughout the floor to help in extraction.

Pink Bull Racing RB20 element

Picture by: Uncredited

A conventionally stacked beam wing association on the rear of the Pink Bull RB20, albeit with a brief chord on each parts. Additionally word the breather pipe is routed by way of the crash construction, with the outlet sitting within the void above the rain gentle.

Pink Bull Racing RB20 element

Picture by: Uncredited

A smaller, further, cooling outlet could possibly be discovered across the lead arm of the rear suspension’s decrease wishbone on the Pink Bull RB20.

Aston Martin AMR24 element

Picture by: Uncredited

The ahead curled profile on the Aston Martin AMR24’s flooring edge is complimented by 4 angled strakes to enhance extraction.

McLaren MCL38 technical element

Picture by: Giorgio Piola

The low and rearward mounted rear leg of the higher wishbone on the McLaren MCL38’s entrance suspension is finished for aerodynamic functions.

Alpine A524 technical element

Picture by: Giorgio Piola

An Alpine mechanic takes photographs of the underside of the nostril and entrance wing that is been out on observe with the floor sprayed with flo-viz paint.

Pink Bull Racing RB20 technical element

Picture by: Jon Noble

An in depth-up of the 2 inlets on both facet of the halo’s rear leg, one on prime of the sidepod and the opposite behind the driving force’s head and alongside the airbox.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

An in depth-up of the vertical tab on the rear nook of the Pink Bull RB20’s edge wing.

Haas VF-24 technical element

Picture by: Giorgio Piola

The bib winglet may be noticed within the background of this picture on the Haas VF-24, a characteristic that a lot of the grid now had in a single format or one other.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

Pink Bull started to tidy up the looks of the louvred panel on the facet of the RB20’s engine cowl because the season progressed, having had extra of an ad-hoc association within the opening rounds.

Mercedes F1 W15 entrance wing element

Picture by: Giorgio Piola

A top-down overview of the Mercedes W15’s entrance wing exhibits how the strip-like inboard higher aspect permits the remainder of the flap to taper down aggressively towards the flap pivot.

Kick Sauber C44 technical element

Picture by: Giorgio Piola

A take a look at a number of the decrease layers throughout the nest of parts that make up the brake duct on the Sauber C44 and assist to chill the varied parts and alter the thermal interplay between them and the wheel rim.

McLaren MCL38 entrance wing element

Picture by: Giorgio Piola

The McLaren MCL38’s entrance wing has flo-viz paint utilized to the outermost nook in order that upon its return to the storage the staff can seize visible affirmation that it is performing as anticipated.

Mercedes W15 technical element

Picture by: Giorgio Piola

Mercedes launched a brand new entrance wing specification on the Monaco Grand Prix, with the slender higher flap on the inboard finish of the wing returned to a extra standard chord peak, whereas all the span of the higher flaps was adjusted accordingly.

McLaren MCL38 technical element

Picture by: Giorgio Piola

McLaren’s high-downforce rear wing association for the Monaco Grand Prix featured parts that took up extra space throughout the allowable field area throughout all the span of the meeting than any of their different designs.

Williams FW46 technical element

Picture by: Filip Cleeren

The high-downforce association on the rear of the Williams FW46 for Monaco included a bi-plane type beam wing association with an awfully giant decrease aspect.

Ferrari SF-24 technical element

Picture by: Giorgio Piola

A shot of the interior brake disc and calliper fairing on the entrance of the Ferrari SF-24.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

Flo-viz paint on the rear wing, beam wing and diffuser of the Pink Bull RB20, because the staff seems for visible affirmation that their efficiency is as anticipated.

RB F1 Workforce VCARB 01 technical element

Picture by: Filip Cleeren

Appreciable effort is made by the groups, RB on this occasion, to design the brake duct furnishings and rear suspension fairings to be able to work in unison and extract the utmost quantity of efficiency.

Aston Martin AMR24 rear element

Picture by: Giorgio Piola

An in depth-up of the rear finish of the Aston Martin AMR24, together with the outboard step within the diffuser, the twin-element winglet association on the again of the crash construction and the flat breather pipework on prime.

Haas VF-24 element

Picture by: Giorgio Piola

An attention-grabbing view of the Haas VF-24’s flooring, together with the vanguard and flooring fence geometry, because the mechanic works on the securing brackets.

Kick Sauber C44 technical element

Picture by: Filip Cleeren

A 3-quarter view of the Sauber C42 offers an excellent impression of how the sidepod bodywork is sculpted and the detailed work accomplished on the ground’s edge.

Mercedes W15 technical element

Picture by: Giorgio Piola

A Mercedes mechanic lifts the self-importance panel to work on the inboard suspension parts housed beneath.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

The Pink Bull RB20 is fitted with a kiel probe rake forward of the rear wing, whereas a small two-probe array is hung within the endplate and mainplane juncture to assist collect information on how the airflow behaves across the meeting.

Ferrari SF-24 technical element

Picture by: Giorgio Piola

An in depth-up of a number of the inboard entrance suspension parts on the Ferrari SF-24, together with the heave damper.

Ferrari SF-24 technical element

Picture by: Giorgio Piola

An in depth-up of the rear wing’s higher flap on the Ferrari SF-24 on the Hungarian Grand Prix, which incorporates a big Gurney flap on the trailing fringe of the higher flap to extend downforce and enhance steadiness.

Ferrari SF-24 technical element

Picture by: Giorgio Piola

Extra cooling for the facility unit and its ancillaries is taken care of with an enlarged louvred panel on the Ferrari SF-24 on the Hungarian Grand Prix.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

Pink Bull with a big kiel probe rake mounted behind the entrance wheels on the RB20 because it seems to seize information that can be utilized to correlate between the real-world setting and its simulation instruments.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

Facet view of the Pink Bull RB20 displaying the design of the ground, sidepods and engine cowl

Alpine A524 technical element

Picture by: Jake Boxall-Legge

A facet view of the Alpine A524’s rear wing on the Belgian Grand Prix exhibits how giant the higher rear endplate cutout is and the way a lot the tip part reaches ahead over it as a consequence.

Sauber C44 technical element

Picture by: Jake Boxall-Legge

A rearward shot of the Sauber C42 on the Belgian Grand Prix, displaying the diffuser, decrease downforce rear wing and single-element beam wing.

Mercedes W15 technical element

Picture by: Jake Boxall-Legge

An analogous picture of the Mercedes W15 exhibits the completely different method taken by the 2 groups for the Belgian Grand Prix, with a comparatively greater downforce rear wing and bi-plane type beam wing association employed.

Ferrari SF-24 flooring element

Picture by: Giorgio Piola

A uncommon glimpse on the inside development of the Ferrari SF-24’s flooring and a number of the sensors mounted to it.

Aston Martin AMR24 technical element

Picture by: Giorgio Piola

Trying down on the looped halo winglet on the Aston Martin AMR24 because the staff does some pitstop apply.

Haas VF-24 entrance wind element

Picture by: Giorgio Piola

A top-down overview of the Haas VF-24’s entrance wing, which exhibits how the designers have prioritised a wider mainplane aspect and three narrower flaps within the outboard portion of the wing, to help in producing outwash.

Additionally word the winglet stack mounted within the rear nook of the endplate, which additionally helps with outwash.

Williams Racing FW46 flooring element

Picture by: Giorgio Piola

An outline of the Williams FW46’s edge wing, the ahead part of which contains a tiered winglet association, whereby the sting wing sits above a cutout within the flooring.

McLaren MCL38 technical element

Picture by: Giorgio Piola

A glance contained in the nostril tip of the Pink Bull RB20 reveals the block of ballast positioned as far ahead as potential throughout the tip, whereas the interior ducting for driver cooling can be seen.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

Pink Bull painted flo-viz on its rear wing meeting to verify it was working as anticipated with the staff having trimmed some crescent-shaped gaps into the higher flap’s trailing edge.

Pink Bull Racing RB20 technical element

Picture by: Giorgio Piola

The entrance wing was additionally given an identical therapy to assist steadiness the automobile from entrance to rear.

Pink Bull Racing RB20 entrance wind element

Picture by: Giorgio Piola

An in depth-up of the entrance wing endplate and outer nook element on the Pink Bull RB20. Additionally word the round reference dots positioned across the meeting that are monitored by a digital camera fitted to the nostril, the footage of which is used to examine for flexion.

Williams FW46 technical element

Picture by: Giorgio Piola

An ideal shot of the rear of the Williams FW46, together with the diffuser, single aspect beam wing and low downforce rear wing package deal put in for the challenges posed by the Baku avenue circuit.

McLaren MCL38 rear wing element

Picture by: Uncredited

McLaren’s rear wing courted controversy on the Azerbaijan Grand Prix, because the ahead corners of the higher flap could possibly be seen to be opening the hole between them and the mainplane on the straights, which might assist to spice up their straight-line pace.

Ferrari SF-24 new entrance wing element

Picture by: Giorgio Piola

Ferrari up to date its entrance wing for the Singapore Grand Prix, altering the higher flap parts throughout their span but in addition rising the twist profile of the tip part (circled).

Haas VF-24 element

Picture by: Andreas Beil

An in depth-up of the heave damper used on the Haas VF-24’s entrance suspension association.

Ferrari SF-24 element

Picture by: Andreas Beil

A take a look at the rear finish of the Ferrari SF-24 has loads of particulars to uncover, together with the small winglets mounted on the rear wing pillar, the complicated higher winglet stack on the rear brake duct, the stepped decrease edge on the decrease brake duct winglet, the contouring on the ceiling of the diffuser and the decrease wedge-shaped part at its base.

Ferrari SF-24 element

Picture by: Andreas Beil

The Ferrari SF-24’s rear suspension being labored on away from the automobile offers a unbelievable view of the fairings used to cowl the precise suspension parts and the way they are going to affect the airflow that passes round them.

Ferrari SF-24 element

Picture by: Andreas Beil

An uncommon shot of the Ferrari SF-24’s entrance wing exhibits how a lot curvature there may be throughout the span of the wing.

Mercedes F1 W15 element

Picture by: Giorgio Piola

Mercedes launched a big replace package deal for the W15 at the US Grand Prix, which included a brand new entrance wing, reprofiled suspension fairings, the addition of one other vane on their edge wing, new flooring fence geometry, further cooling exits across the rear suspension and revised sidepod bodywork, which resulted within the decrease part of the inlet being eliminated and the overbite-style resolution most well-liked.

Pink Bull Racing RB20 element

Picture by: Giorgio Piola

Flo-viz paint on the Pink Bull RB20’s vertical sidepod inlet offers a visible illustration of how the airflow strikes throughout the surfaces, permitting the staff to shortly assess if it is performing as anticipated.

Haas VF-24 technical element

Picture by: Andreas Beil

Haas up to date its sidepod inlet association at the US Grand Prix, making the shift to the overbite resolution that lots of their rivals had already been utilizing in 2024. This additionally helped to change the dimensions of the sidepod’s undercut, which allowed a revised circulate regime to fulfill the up to date flooring that was additionally a part of their replace package deal.

McLaren MCL38 flooring

Picture by: Andreas Beil

Two MCL38 flooring mounted on prime of each other within the McLaren storage afford us an obscured view of the ground strakes from beneath, whereas the ground within the foreground exhibits us how giant the wedge-shaped central part within the roof of the diffuser is.

Haas VF-24 entrance bib element

Picture by: Andreas Beil

An in depth-up of the bib and bib winglet used on the Haas VF-24.

Alpine A524 entrance bib element

Picture by: Andreas Beil

A take a look at the bib area on the Alpine A524 with the bodywork off reveals the spring mechanism getting used.

McLaren MCL38 entrance bib element

Picture by: Andreas Beil

Equally, we’re capable of see the spring mechanism on the McLaren MCL38 that is housed between the bib and chassis.

Ferrari SF-24 technical element

Picture by: Andreas Beil

The identical area on the Ferrari SF-24 exhibits how completely different the entire groups method the design of their bib, the spring mechanism and the way lots of the different ancillary parts they pack into that portion of the automobile.

Pink Bull Racing RB20 technical element

Picture by: Andreas Beil

The vanguard and flooring fence element on the Pink Bull RB20, with the spacing and completely different contours of every fence used to assist management the passage of the airflow rearward.

Aston Martin AMR24 technical element

Picture by: Andreas Beil

This angle of the sting wing exhibits how cranked the aspect is within the ahead part on the Mercedes W15, with the interior fins used to assist management how the airflow strikes round its floor.

Aston Martin AMR24 technical element

Picture by: Andreas Beil

The inside nest of Aston Martin’s rear brake duct has fins on the floor of the crossover channel to be able to assist direct the airflow because it passes by way of the chamber.

Ferrari SF-24 technical element

Picture by: Giorgio Piola

Ferrari launched its most cooling possibility for the Mexican Grand Prix, which included a louvre panel on the higher floor of the sidepod and a set of elongated louvres within the engine cowl panel.

McLaren MCL38 technical element

Picture by: Alex Kalinauckas

McLaren additionally expanded the cooling on its automobile in Mexico, with the louvres straddling each the sidepod and engine cowl.

Pink Bull Racing RB20 element

Picture by: Giorgio Piola

A take a look at a number of the element beneath the outer covers that make up the entrance brake duct on the Pink Bull RB20, which incorporates brake disc fairing which has a high-temperature coating to assist handle the warmth being generated, whereas an aperture may be discovered on the entrance to permit warmth to maneuver between the varied nests.

Additionally, word the pin-like cooling fins used on the outer floor of the brake calliper to each cut back weight and handle temperature.

Stake F1 Workforce KICK Sauber C44 technical element

Picture by: Giorgio Piola

Sauber launched a lot of new parts at the US Grand Prix, together with revised entrance suspension fairings, to be able to benefit from the modifications made with its entrance wing.

Williams FW46 flooring element

Picture by: Andreas Beil

The C-shaped notch and upwardly edged profile of the ground’s edge on the Williams FW46 permits the sting wing to stack above it, complimenting the 2 forwardmost winglets of the aspect and enabling the entire floor to take a seat greater and cranked greater than may in any other case be potential.

Pink Bull RB20 flooring element

Picture by: Andreas Beil

For comparability functions here is the answer utilized by Pink Bull for a while now which additionally employs the stacked flooring and edge wing association.

Mercedes F1 W15 flooring element

Picture by: Andreas Beil

Mercedes additionally launched an identical characteristic for the W15 as a part of their replace package deal at the US Grand Prix, albeit they employed a shorter notch within the flooring, which signifies that the second aspect of its edge wing takes full benefit of flooring phase beneath.

Haas VF-24 element

Picture by: Andreas Beil

An in depth-up of the rear part of the entrance wing on the Haas VF-24, exhibits how the three rearmost parts are pushed away from the endplate, angled outwards and their trailing edge angled down. This, together with the multi-element winglet array mounted on the rearmost aspect all help in producing outwash.

Pink Bull Racing RB20 brake drum element

Picture by: Andreas Beil

The secondary nest contained in the rear brake duct on the Pink Bull RB20 not solely has a coating to behave as a thermal barrier however there are quite a few baffles employed to direct the airflow within the area between the 2 nested drums.

Alpine A524 entrance wing element

Picture by: Andreas Beil

A uncommon glimpse on the underside of the entrance wing, which is the Alpine A524 on this occasion exhibits how the metallic brackets help the wing parts.

Pink Bull Racing RB20 cooling element

Picture by: Andreas Beil

An in depth-up of the halo inlet on the Pink Bull RB20 which additionally has a stepped circulate diverter mounted atop it to help in redirecting the airflow across the rear leg of the protection construction.

McLaren MCL38 rear brake element

Picture by: Andreas Beil

The removing of the outer brake drums on the rear meeting of the McLaren MCL38 reveals the slim brake disc fairing, crossover duct and double-entry calliper fairing options used to chill the varied parts that make up the rear brake meeting.

McLaren MCL38 diffuser element

Picture by: Andreas Beil

An in depth-up of the rear finish of the McLaren MCL38 exhibits the varied contours employed on the ceiling of the diffuser and its nook, whereas it is attention-grabbing to notice the thickness of the decrease portion of the brake duct winglet, which can be stepped and has the rear part lower away.

Stake F1 Workforce KICK Sauber C44 wood plank element

Picture by: Andreas Beil

Trying beneath the ground of the Sauber C44 we’re reminded of how lengthy the ground fences attain again, as they’re routed to the surface entrance nook of the ground, whereas it is also clear to see the contouring throughout the tunnel part.

Ferrari SF-24 technical element

Picture by: Andreas Beil

A wonderful view of the rear brake duct winglet stack on the Ferrari SF-24 exhibits how intricately designed this space is and simply what number of winglets may be stacked right into a small area.

Ferrari SF-24 entrance wing element

Picture by: Andreas Beil

The outboard nook of Ferrari’s entrance wing has the 2 rearmost parts keyed towards outwash technology, as not solely are they a semi-detached association, they have been contorted to be able to alter the airflow’s passage round them.

Pink Bull Racing RB20 rear wing element

Picture by: Giorgio Piola

Pink Bull opted in opposition to designing and manufacturing a real low-downforce rear wing meeting for 2024, with the staff pressured to be artistic when it got here to trimming the trailing fringe of the higher flap, to be able to cut back drag for the Las Vegas avenue circuit. You will word that an equally well-trimmed, single-element beam wing was additionally employed.

Ferrari SF-24 flooring element

Picture by: Giorgio Piola

Ferrari launched an experimental flooring on the Las Vegas Grand Prix because it sought solutions on some design facets that is likely to be relevant transferring into 2025. Charles Leclerc would later go on to race the merchandise in Qatar, which enabled them to do additional testing of each flooring specs on the post-season take a look at in Abu Dhabi.

McLaren MCL38 rear wing element

Picture by: Giorgio Piola

McLaren’s lowest-downforce rear wing providing of the season was utilised on the Las Vegas Grand Prix and featured parts that take up little or no of the area allowed throughout the given field area.

Alpine A524 technical element

Picture by: Giorgio Piola

Alpine had a equally small rear wing meeting for Las Vegas which may be seen right here because the automobile is ready for motion. Be aware the uncovered particulars of the DRS actuator too, with the pod bodywork eliminated, whereas the outer drum being displaced from the rear brake duct additionally exhibits the interior baffles used to change the passage of circulate across the meeting.

Mercedes F1 W15 entrance brake element

Picture by: Giorgio Piola

The inside basket on the Mercedes W15’s brake drum featured a number of apertures that allowed warmth to maneuver between the 2 parts.

Pink Bull Racing RB20 T-Tray element

Picture by: Giorgio Piola

A take a look at the Pink Bull RB20’s keel area with out the bodywork in place reveals the spring aspect that bridges the hole between the chassis and T-tray.

Pink Bull Racing RB20 element

Picture by: Giorgio Piola

Pink Bull made modifications to the format of its flooring fences on the Las Vegas Grand Prix, with the second inboard fence raised above the ground’s vanguard. It is a resolution we have seen from a number of of their rivals with this technology of vehicles, with Mercedes notably having an identical resolution for 2024 already.

The taller fence will shed a vortex from the higher floor to assist with circulate circumstances downstream.

Alpine A524 Entrance Wing comparability (highlights)

Picture by: Uncredited

Alpine launched a brand new entrance wing and nostril meeting on the Qatar Grand Prix, because the staff appeared to get a headstart on understanding how these modifications would affect them going into 2025.

The nostril is shorter than its predecessor, with a a lot squarer profile because it sits on the vanguard of the second aspect, quite than the mainplane. The form of the central part of the mainplane and the flaps thereafter have additionally been modified, with the proportion of the wing devoted to load and wake adjustment altered as a consequence.

Pink Bull Racing RB20, engine, element shot

Picture by: Erik Junius

A peek beneath the covers of the Pink Bull RB20 reveals the V-shaped and inclined format of the radiator and coolers throughout the sidepods.

Haas VF-24, entrance wing element

Picture by: Erik Junius

The Haas VF-24 with the nostril tip part eliminated reveals the placement of the strain faucet scanner, whereas the tubes are fed out to varied factors on the underside of the entrance wing. Additionally word the 4 studs that are the mounting factors used to deal with ballast within the nostril.

Williams FW46, entrance wheel brake element

Picture by: Erik Junius

A take a look at the interior brake disc fairing on the Williams FW46, which envelopes the disc and wraps round and excessive of the calliper, leaving a window for warmth rejection on the backside of the meeting.

Aston Martin AMR24 rear wing element

Picture by: Giorgio Piola

Aston Martin fitted a big kiel probe rake to the rear of the AMR24 in Free Observe for the Abu Dhabi Grand Prix, because it appeared to seize information concerning the airflow’s behaviour because it reached the again of the automobile. Notably, the kiel probes are angled upward which supplies a sign as to the airflow’s anticipated trajectory.

KICK Sauber C44 diffuser element

Picture by: Giorgio Piola

A pattern that emerged throughout 2024 is for designers to change the form of the decrease boat tail part contained in the diffuser, to be able to alter the accessible quantity and enhance circulate behaviour over a spread of circumstances.

Right here it may be seen how Sauber has modified this part on the C44 with a bit bonded to the unique flooring in Abu Dhabi.

McLaren MCL38 rear wing element

Picture by: Giorgio Piola

Considered one of seven rear wings launched by McLaren through the season, because the staff appeared to trim their automobile for the varied circuit traits they encountered.

This rear wing meeting was first launched in Brazil however may be seen right here with flo-viz paint utilized on the Abu Dhabi Grand Prix, because the staff seems to determine whether or not it is performing as anticipated in comparison with the simulation information.